Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
Case Tractor Forum Archives by Subject
[Sort by Subject]    [Search]    [Main Forum]

[ Previous Page]   Page 564 of 670    [ Next Page ]

SubjectPosted ByYear
Early 1370? Get the update kit!Roger (Mi)2007
Easier to deal with a basket full of snakesRoger (Mi)2009
Either packing or secondary reliefRoger (Mi)2007
Evertthing Cambolted said plus...Roger (Mi)2008
Exhaust on gasoline engines are hotter than diesel.Roger (Mi)2008
ExtendahoeRoger (Mi)2009
Find a salvage yard with Case tractorsRoger (Mi)2010
Flat top pistons for a 504?Roger (Mi)2007
Forgot to mentionRoger (Mi)2009
Fuel flow to the injection pump?Roger (Mi)2009
Gasket leak?Roger (Mi)2008
Gene has it rightRoger (Mi)2008
Get a repair manual at a farm storeRoger (Mi)2007
Get an operator's manualRoger (Mi)2007
Great tractorRoger (Mi)2007
Grit will ruin an overhaulRoger (Mi)2007
Have had good luck with aftermarket kitsRoger (Mi)2007
Hoe attachment will require some part changesRoger (Mi)2008
Hood modificationRoger (Mi)2007
How old is the 1370?Roger (Mi)2007
Hydraulic cylinder piston rod stud torqueRoger (Mi)2007
Hydraulic hook up for log splitterRoger (Mi)2006
Hydraulic oil in the rear end?Roger (Mi)2007
I have a 10 ft wheel discRoger (Mi)2004
I just bought oneRoger (Mi)2007
I've just purchased a Case air cooledRoger (Mi)2007
If it's a 530, the gas engine will be 159 CID.Roger (Mi)2006
It's been done hundreds of timesRoger (Mi)2007
It's economy too...Roger (Mi)2007
It's the pressure plateRoger (Mi)2008
Just some additional informationRoger (Mi)2010
Least resistance moves firstRoger (Mi)2009
Look at swing cylinders againRoger (Mi)2007
Look in a salvage yardRoger (Mi)2009
Look in salvage yardRoger (Mi)2007
Lube for transmission and final drivesRoger (Mi)2009
Make a tool.Roger (Mi)2007
May have to replace the boom control valveRoger (Mi)2007
More on secondary reliefsRoger (Mi)2007
More than just headsRoger (Mi)2007
My 1030 has (add-on) turboRoger (Mi)2008
My badRoger (Mi)2008
Nedd is correct.Roger (Mi)2010
Need at least five valvesRoger (Mi)2010
Need to replace rockshaft piston sealRoger (Mi)2007
Need to replace the 3 point lift piston seal..Roger (Mi)2007
Need to replace the lower hydraulic valve bodyRoger (Mi)2008
New Idea 7' siclkle bar mowerRoger (Mi)2007
New piston rings, bearings, and gasketsRoger (Mi)2007
No 430 orchard model from the factoryRoger (Mi)2007
No Hercules in 800 or 1000Roger (Mi)2009
No need to bleed injectors.Roger (Mi)2008
No need to remove the axle housing.Roger (Mi)2007
No need to splitRoger (Mi)2008
No transfer pump on a Roosa Master pump.Roger (Mi)2007
Not good newsRoger (Mi)2009
Not likely a governor problemRoger (Mi)2007
Not to worryRoger (Mi)2007
Offset tool for head bolts.Roger (Mi)2007
Oil slinger driven by third/fourth gearRoger (Mi)2007
Oil well and drive inRoger (Mi)2007
PTO removal not the problem....Roger (Mi)2007
Possible locationRoger (Mi)2007
Power shuttle troubleRoger (Mi)2007
Radiator 750D Case LoaderRoger (Mi)2007
Raise the loader frame first.....Roger (Mi)2006
Removing the timing cover serves no purposeRoger (Mi)2007
Replace the packingRoger (Mi)2007
Replace the rock shaft piston seal.Roger (Mi)2007
Replace the rockshaft 3 point piston sealRoger (Mi)2008
Replaced the 1000 with an 1150Roger (Mi)2009
Replaced valve bodyRoger (Mi)2008
Rod installationRoger (Mi)2007
Room under the hood for intercooler?Roger (Mi)2009
Roosa-Master is self primingRoger (Mi)2009
Rule of thumbRoger (Mi)2007
Rust!Roger (Mi)2007
Salvage Yard in MichiganRoger (Mi)2010
Same as 430 530 agricultural tractorsRoger (Mi)2007
Secondary reliefsRoger (Mi)2007
Should NOT be relatedRoger (Mi)2007
Some Case 1030 sleeves have a flawRoger (Mi)2007
Something in the valve train...Roger (Mi)2007
Sorry, hit the wrong keyRoger (Mi)2007
Spider gear inspection and removalRoger (Mi)2007
Stamm EquipmentRoger (Mi)2007
Start with simple things firstRoger (Mi)2007
Stuck hydraulic pump shaftRoger (Mi)2007
Stuck relief?Roger (Mi)2009
TCH (Torque Convertor Hydraulic)Roger (Mi)2007
TCH oilRoger (Mi)2009
Take a trip to a salvage yardRoger (Mi)2010
The bottom hydraulic valve is totally usedRoger (Mi)2008
This trick may workRoger (Mi)2007
To my knowledge, no such animalRoger (Mi)2008
Torque specs.Roger (Mi)2007
Trans-hydraulic fluid usageRoger (Mi)2008
Try removing the belly panRoger (Mi)2009
Turned up infection pump.Roger (Mi)2008
Undoubtly, it's the right side brake.Roger (Mi)2009


[ Previous Page]   Page 564 of 670    [ Next Page ]


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums  |  Order Support


Today's Featured Article - Field Modifications (Sins of the Farmer) - by Staff. Picture a new Chevrolet driving down the street without it's grill, right fender and trunk lid. Imagine a crude hole made in the hood to accommodate a new taller air cleaner, the fender wells cut away to make way for larger tires, and half of a sliding glass door used to replace the windshield. Top that off with an old set of '36 Ford headlight shells bolted to the hood. Pretty unlikely for a car... but for a tractor, this is pretty normal. It seems that more often than not they a ... [Read Article]

Latest Ad: Ford 3-Point Single Bottom Moldboard Plow with Coulter [More Ads]

Copyright © 1997-2026 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy