Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Case Tractors Discussion Forum
:

More on secondary reliefs

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
Roger (Mi)

07-15-2007 17:03:08




Report to Moderator

mEl,

I too worked at Case dealerships as a mechanic. I've been to numberous schools at Racine as well.

Additionally, I own a 580B loader/backhoe. It's one great machine given its small size. The following is from my own experience. I was trying to lift and set a large septic into a hole. When I pulled back on the boom lift lever, it would not lift the tank. The boom secondary relief was opening. I then curled the dipper, raised the boom, then straightened the dipper. Up it went! Why didn't the boom secondary relief open again and everything settle to the ground? My service manual does not show a hydraulic flow diagram. Now, I'm curious. I checked the Internet for Cross and Cessna control valves for Case backhoes but with no luck. I'll need to go my local industrial dealer and ask to see their book.

[Log in to Reply]   [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy