Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
Harry Ferguson Tractor Forum Archives by Subject
[Sort by Subject]    [Search]    [Main Forum]

[ Previous Page]   Page 86 of 265    [ Next Page ]

SubjectPosted ByYear
how hard to replace rings on TO-20?George in MI2004
is there a Robert Wieting out there...from Green BGeorge in MI2006
it has to be worth $300George in MI2008
loose chainsGeorge in MI2007
nice tractors!George in MI2005
picture of Ferguson factoryGeorge in MI2007
question on tach/hour meter deviceGeorge in MI2008
rear lift arms will not go upGeorge in MI2011
results with regulator adjustments....George in MI2005
sounds like fuel supply to meGeorge in MI2006
sounds like the starterGeorge in MI2006
thanks PaulGeorge in MI2006
thanks for carb advice...more needed on plowGeorge in MI2006
this one does have the Marvel-Schebler carbGeorge in MI2006
when you need more than a TO-20George in MI2007
yes....butGeorge in MI2006
lost a part..what to do (TO-20)?George in MIchigan2011
paint schemeGeorge in MIchigan2011
video availableGeorge in MIchigan2011
well on my old Power Wagon...George in MIchigan2011
Pistons Used in TE/TO Z-120 EngineGeorge in Mi2004
I use Autolite 388 in a worn engineGeorge in Mich2005
King-Seeley governorGeorge in Mich2004
Wanted TO 35George in Mich2004
gas consumption..how much per hour?George in Mich2006
how to remove fenders on TO-20George in Mich2006
Adjusting the brakes on a T0-35George in Michigan2010
Anyone have some Fergy wheels with or without tires for saleGeorge in Michigan2010
Boyne City showGeorge in Michigan2005
Buckley show and the F-40...what is it?George in Michigan2003
Ferguson System Signs...availableGeorge in Michigan2003
Ferguson tractor/implement auction in PennsylvaniaGeorge in Michigan2010
Help..3 pt theory and how to connect a plow/ploughGeorge in Michigan2003
OK...I am no where near the low!!George in Michigan2008
PICS....three nice Fergusons at Michigan showGeorge in Michigan2003
TO-20 wheels and rim problemGeorge in Michigan2010
Tire Chains in Leelanau County , MIGeorge in Michigan2008
To clarify what I need and what I think I will do..George in Michigan2010
cold weather starting on a TO-20George in Michigan2008
didn't know vapor lock was possible on a tractorGeorge in Michigan2007
help...Pic of parts for TO-20...what are they??George in Michigan2003
language issuesGeorge in Michigan2006
more Buckley Pics...Ferguson boxGeorge in Michigan2003
one more PIC, Ferguson front end loaderGeorge in Michigan2003
Gerald...a follow up question on shear pinGeorge in NW MI2005
Regulators...how do they work, how to adjust?George in NW MI2005
Rollover angle??George in NW MI2004
Thanks!....but a few more questionsGeorge in NW MI2005
Westach also can provide themGeorge in NW MI2005
another question re the install of screenGeorge in NW MI2005
check of the gauge and lines, look okGeorge in NW MI2005
flipping, why doesn't this happen in tractor pullsGeorge in NW MI2005
gshadel tach/hr meter recommendation..great!George in NW MI2005
more information about this regulator situationGeorge in NW MI2005
thanks for suggestions, about the main bearingsGeorge in NW MI2004
what is a hotter heat range spark plug?George in NW MI2004
How hard to replace TO-20 oil pump?George in NW Mic2005
I have video of 2004 FENAGeorge in NW Mic2005
Thanks for helpGeorge in NW Mic2005
Yes, join FENA and get a great newsletterGeorge in NW Mic2005
cold running problem and charging problemGeorge in NW Mic2004
how to fit a temp gauge to a TO-20?George in NW Mic2004
need source and advice on TO-20 generatorGeorge in NW Mic2004
no oil pressure...causes??George in NW Mic2005
I changed mine for a 1 3/8George in NW Mich2005
I don't see your adGeorge in NW Mich2004
Never toss your old parts....regulator storyGeorge in NW Mich2004
No oil pressure today...what could be wrong?George in NW Mich2004
PIC of Freeman front loader on a TEA 20George in NW Mich2004
Update....I did buy a rebuild kitGeorge in NW Mich2005
Vertical exhaustGeorge in NW Mich2005
check the grillGeorge in NW Mich2005
could be very valuableGeorge in NW Mich2004
if you need position control get a Zane ThangGeorge in NW Mich2005
mine was about $50 from MF dealer...no txtGeorge in NW Mich2005
oil pressure problem identified...question re pumpGeorge in NW Mich2005
oil routing in and out of filter....I don't undersGeorge in NW Mich2005
old git in MichiganGeorge in NW Mich2005
tachometers and TO-20sGeorge in NW Mich2005
thermostat query, which end is bellows end?George in NW Mich2004
where I workedGeorge in NW Mich2005
more on no oil pressure problemGeorge in NW Michigan2005
response to the two previous postsGeorge in NW Michigan2005
te20 changed trans / diff oil today still have a problem.George in Pa2013
te20 trans / diff oil change today.George in Pa2013
Stuck needle valve?George in Spokane2008
Using a Zenith Carb on a TO-35George in Spokane2008
Eating TO-35 startersGeorge in Spokane2007
Finished! ROPS on T0-35George in Spokane2006
Paint color on a ROPS?George in Spokane2006
hot coil after rebuildGeorge in Spokane2005
fluxGeorge libby2012
regulatorGeorge libby2011
thanksGeorge libby2011
front wheel seal leaking oilGeorge maine2011
harry ferguson Where to get information bookGeorge van Schyndel2008
...also, how hard to change rear pto shaft?George2002
12 volt conversion on a TO-20?George1999
Bizarre electrical grounding question...HELP PleaseGeorge2002
Broken castingGeorge2000


[ Previous Page]   Page 86 of 265    [ Next Page ]


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums  |  Order Support


Today's Featured Article - Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel ... [Read Article]

Latest Ad: Ford 3-Point Single Bottom Moldboard Plow with Coulter [More Ads]

Copyright © 1997-2026 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy