Posted by CarolynDiesel8N on September 01, 2012 at 04:21:53 from (70.192.66.1):
the pump on my 8N malfunctioned. I got that fixed but discovered that the shaft that is supposed to power it does not. The shaft currently moves at a slower rotational speed than the engine. I was told that the shaft was made to strip if the pump seized in order to protect the engine. I am trying to remove the shaft from the hydrauic hub but I have not been successful so far. I removed the nuts connecting the hyrdraulic hub. I have dropped the pump so the shaft can pull out. But I have not been able get the shaft out. Sometimes the shaft turns/spins freely if it is pulled out a little bit from the hub and other times it won"t budge. It was suggested that I have to get what is left of the spline lined up so that it can pull out of the hub, but I have been trying slight rotations to see if I can get it lined up but it has not worked. What is the trick to removing the shaft under this situation. Thank you very much. I really need my front end loader. Carolyn Diesel 8N
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Tractor's Point of View - by John Manley. I began my life on August 3,1941. I was actually built at different times and days but I was officially an M Farmall on August 3.I was real nice and shiny. That�s me, in the old picture, third from the left. I was loaded on that train and sent to a little town in South Carolina. I didn�t get to see much of that town. I was moved off the train fast and on to the dealer�s
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
