Bobcat M-600 Question

Posted by d-deral on May 27, 2005 at 04:07:45 from (68.118.238.157):

I recently aquired a Bobcat M-600. All the lift hydraulics work well. However I am having problems turning the machine. Only once has the machine turned properly, when I drove it off the flatbed and turned into my driveway (it did not turn properly when it was loaded onto the flatbed). I have adjusted the clutches per the owners manual with no change in operation. Forward and backward work fine. When trying to turn, the machine hops and stops. I have pulled the side covers and checked chain tension - all seems correct and chains and sprockets look new. The drive belt looks ok but is very sloppy - lots of play. The variable speed drive does not seem to be working. You can hear the pump working but no visable change to the pulley. Does anyone know how much play there should be in the main drive pulley when the variable speed drive is in the low speed position?

Follow Ups:

• Re: Bobcat M-600 Question Delbert from Lincoln 17:22:04 05/27/05 (0)
• Re: Bobcat M-600 Question cootbruce 07:03:02 05/27/05 (4)
  • Re: Bobcat M-600 Question d-deral 05:10:07 05/28/05 (3)
    • Re: Bobcat M-600 Question Delbert from Lincoln 15:24:31 05/28/05 (2)
      • Re: Bobcat M-600 Question d-deral 19:28:35 05/28/05 (1)
        • Re: Bobcat M-600 Question Delbert from Lincoln 11:59:02 06/01/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]