Re: Bobcat M-600 Question

Posted by d-deral on May 28, 2005 at 05:10:07 from (68.118.238.157):

In Reply to: Re: Bobcat M-600 Question posted by cootbruce on May 27, 2005 at 07:03:02:

I changed the drive belt and that was the problem. The variable speed pulley was frozen and took some time to work loose. Putting the belt on is a major ordeal! I finally got the belt on and did a quick test for motion- turned fine. I am still unable to get the outer half of the variable drive pulley back on. The new belt is stiff and I was not able to get the pulley"s compressed enough to get the snap ring on. Will work more on it today. Is there a trick to this? My manual does not go in to detail on "how to". I have the piston to the variable drive pulled all the way out and am still about 3/4" from getting the ring on. Hey, what do I expect when I only paid $1500.

Follow Ups:

• Re: Bobcat M-600 Question Delbert from Lincoln 15:24:31 05/28/05 (2)
  • Re: Bobcat M-600 Question d-deral 19:28:35 05/28/05 (1)
    • Re: Bobcat M-600 Question Delbert from Lincoln 11:59:02 06/01/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]