|
Tractor Talk Discussion Board |
HOW MANY TRACTORS DO YOU NEED TO GET YOUR CHORES DONE?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ken McWilliams on April 04, 2001 at 18:42:20 from (64.12.105.176):
An interesting discussion below developed into how many tractors are needed on the farm. I live in SW Ohio where the weather in the summer is hot and humid. Up until the middle of July, the non-rainy days are very narrow windows. I'll usually mow just after a cold front has moved through giving a couple of days of dry air before the heat and humidity return. I've even had to mow in the rain (in the evening after my day job) and then, tedd the next day. I like to have two tractors during haying season. While one is running the baler, the second one is collecting the bales and taking them to the barn. The smaller one can be used for mowing and raking. As mentioned earlier, our good weather windows are very narrow. It seems I'm very frequently baling before a rain. Many times I've just barely gotten the load into the barn when it begins raining. I lost a load once in a downpour. We got about 3" in that rain. We had it loaded in the field, and the storm was coming and couldn't get it to the barn quick enough. We tried tarping the load, but the wind was too high and the tarp made a big kite, or parachute. We just couldn't get the tarp on. I gave the whole load away to someone who had cattle, I couldn't use it for horses. Now, I have three tractors, but currently I'm trying to sell one. I like to have one year around with a loader mounted. It seems I'm always needing a sky-hook to lift stuff and move it around. How many tractors do you have, and why? Ken McWilliams
Dayton, OH
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Hydraulics - Cylinder Anatomy - by Curtis von Fange. Let�s make one more addition to our series on hydraulics. I�ve noticed a few questions in the comment section that could pertain to hydraulic cylinders so I thought we could take a short look at this real workhorse of the circuit. Cylinders are the reason for the hydraulic circuit. They take the fluid power delivered from the pump and magically change it into mechanical power. There are many types of cylinders that one might run across on a farm scenario. Each one could take a chapter in
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
