|
Tractor Talk Discussion Board |
Re: Computer Problems - PRINTER PROBLEM - advice needed !!!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dean on August 17, 2000 at 07:38:20 from (208.155.28.216):
In Reply to: Computer Problems - PRINTER PROBLEM - advice needed !!! posted by Alberta Mike on August 17, 2000 at 07:00:28:
Mike, Problem #1: Assuming you are using Windows 95/98 and either Netscape Communicator or Explorer... In the browser menu at the top of the page: #1 File Menu #2 Page Setup #3 Change left and right margins to 0.05 inches #4 Click OK #5 File Menu #6 Print #7 Properties #8 Paper #9 Enlarge/reduce (check yes) #10 Select 90% #11 Click OK Note that your printer driver may have slightly different menu choices but as long as you get the margins and 90% reduction set it should work. Problem #2 The setup you have should work BUT most folks end up with an A/B box (Radio Shack) that allows you to switch from printer to scanner on your parallel port. Running the printer through the scanner is problematic. If you want to stay with that setup, I suggest you download the latest drivers from IBM first; if that doesn't work, call their technical support group. Good luck!
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
