Posted by Chris in MO on July 17, 2008 at 10:10:17 from (72.161.18.26):
We are looking at adding another vehicle to the family's "fleet". Currently we have a '95 F250 w/ 7.3 diesel and an '87 Suburban. Neither of these does well on fuel.
What we need to do with the vehicle is: 1. My wife makes produce and egg deliveries in town a couple of times a week. 2. I need to cart around tools for my work and frequently a 24' extension ladder. 3.We need to haul up to 5 people every so often to 4H, etc. 4.It would also be helpful to be able to haul a couple of bags of feed or minerals in a pinch. In addition to this, the roads between our house and town are not terribly well maintained, this being Missouri.
I want to keep our current vehicles and add one more. I have been thinking about three possibilities.
An old Toyota p/up with a 4 cylinder engine and 5 speed transmission. I used to work for a service company when I was a kid that had a fleet of these and I remember driving an awful long way without stopping to fill up. This would be great for me, but my wife is hard on vehicles and I would prefer an automatic because of that. In addition, passenger space is limited.
Another thought is to get a hatchback something or other with fold down back seats. There would be passenger space, a small amount of cargo space and good fuel economy(?). The drawback is the inability to cart around a ladder.
The final option is a small station wagon. This would carry people, ladders, and cargo, but I have no idea about fuel economy.
So, if you were in my shoes, what would you do and why?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
