Re: cut out to voltage regulator

Posted by bill in Md on June 22, 2006 at 13:44:37 from (64.26.76.21):

In Reply to: cut out to voltage regulator posted by bill in Md on June 22, 2006 at 09:22:41:

ok, here is what i got. grounded to field on the gene, and read volts at the arm post, 25v. hooked it all back up with a ground from the gene to frame. volts still at 6.2. unhook the batt wire from VR. i get 7v at the VR. i left the head lights on with the engine off for 15 minutes and watched the volts at the battery. no change 6.2. the tractor is mag fired, so it is not using any power to run. maybe the battery is strong enough not to let the VR open and charge.maybe i'm looking too much into this.

Replies:

• Re: cut out to voltage regulator John T 16:50:05 06/22/06 (0)
• Re: cut out to voltage regulator J Schwiebert 15:06:30 06/22/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]