Posted by Rich Iowa on September 19, 2012 at 06:28:03 from (173.30.131.95):
How useful are the aftermarket hitches such as those from Saginawcountytractor and Worksaver? I know there is no draft control so a 3pt plow is out of the question but that's fine. I know they have stablizers so would they work well enough for a 4-row cultivator? I do have collars to place on the cylinders to control the depth. Would the 2 way cylinder provide enough down pressure for a rear blade? Had the thought of saving up some money and getting one for my Oliver 770. I'd also have to purchase front weights and then probably upgrade the front tire from the 5.50-16s to 6 or 6.5-16s, plus the one rear tire already needs to be replaced. Even with all the "extras" I'd need to get I think this would be more affordable than buying another tractor at this time.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
