|
Farmall & IHC Tractors Discussion Board |
Need help with Super M distributor please
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by R.H. on November 29, 2001 at 19:19:18 from (63.62.136.6):
I have three differant IH distributors, which will fit my 53 Super M, and I'm not sure what these differences mean. The original dist. is stamped JA3-xxxxxx, it has a 22L plate under the weights and one weight spring has 6 coils and the other has 7 coils, and both are of equal length. Spare dist. #1 is stamped NK5-xxxxxx, it has a 25L plate under the weights and both springs have 5 coils. The springs appear to be wound of a slightly heavier gauge than the original. Spare dist. #2 is stamped AA2-xxxxxx, it has a 40L plate under the weights, one spring has 7 coils, the other has 8 coils and both are of equal lenght. The spring gauge appears to be the same, or slighty smaller than the original, but the coil diameter is almost twice as much. Can someone explain this mystery to me and offer some advise as to which one will perform the best?
I work my SM reasonably hard on the farm and take it to a couple of local pulls each summer. Thanks.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Horsepower Defined - by Staff. Indicated Horsepower This represents the power developed in the enine cylinder as obtained from the pressure in the cylinders. This is pressure obtained from an indicator which shows cylinder pressures. Indicated horsepower does not represent the actual useful power delivered by the engine. Brake Horsepower This is the actual horse power delivered by the engine to the shaft. It is equal to the "indicated horsepower" less the friction of the engine. It is useful hor
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
