Re: Need help with Super M distributor please

Posted by jakee on November 30, 2001 at 17:40:11 from (205.188.196.27):

In Reply to: Need help with Super M distributor please posted by R.H. on November 29, 2001 at 19:19:18:

the stamping numbers in the plate stand for the amount of advance in the distribitor.if you have a plate that is 30 and you put 10 in the inital set up you will have 40 total at full throttle, i have found most of the springs are way of,take thr dist to a guy with a machine and have him set it up,then you will no what you have.if you buy new spring,s from harvester i think they only sell one set,try 38 to 40 total and see how it works -- but remember if compresion goes up timong must come back.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Need help with Super M distributor please Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]