Re: Need help with Super M distributor please

Posted by Bob M on November 30, 2001 at 14:18:59 from (66.66.72.246):

In Reply to: Need help with Super M distributor please posted by R.H. on November 29, 2001 at 19:19:18:

RH - Those part numbers don't appear in my Super M parts catalog. But the proper advance vs RPM for the Super M is as follows:
TDC @ O RPM
4 deg @ 400 RPM
12 deg @ 600 RPM
15 deg @ 800 RPM

So what you can do is try each distributor on the tractor, and measure the advance with a tach and timing light on the tractor. The one that follows the above curve closest (or the one that runs the tractor best under full RPM/load...) is the one I'd use.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Need help with Super M distributor please Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]