Re: Re: alternator conversion

Posted by Bus Driver on February 28, 2001 at 13:16:01 from (64.53.28.94):

In Reply to: Re: alternator conversion posted by Jon Hagen on February 28, 2001 at 08:12:30:

On the Cub tractors with Delco alternator as factory equipment, IH used a 25 ohm resistor, part # 107 588 C1 instead of a lamp or diode. Some of the indicator lamps used by GM had operating resistances of as much as 53 ohms, so anything between 25 and 53 will be satisfactory. The resistor is not polarity sensitive as is the diode and less prone to burnout than the lamp. I use 44 ohm, 5 watt wirewound resistor from electronics supply house.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: alternator conversion Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]