|
Tractor Talk Discussion Board |
Re: Can I live without live PTO?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve Warfle on June 19, 2000 at 06:16:31 from (205.232.79.32):
In Reply to: Can I live without live PTO? posted by Wayne on June 16, 2000 at 17:27:42:
I have a Ford 2N without live hydraulics, or live PTO. Here's what works and what doesn't. >>>>bush hogging my field no problem....as others said, get an overuning clutch ($40) for safety. >>>>road work with bucket and grader blade>> no problem, though live hydraulics are a plus. Position control (where you lift the implement to where you want it and it stays) is important. Many old tractors don't have this. 8N's do, 2N's and 9N's don't, but you can add an accesory (called a "Zane Thang" check the N board if you buy an N)to give them this capability. >>>possibly some minor logging yes, but learn about safety. tractors aren't really designed for this, and this is the way you get killed, if you don't be careful. Never hitch anything to a point above the rear axle. >>>moving some snow banks One of the only disappointments about m 2N I have is that I can't hook up a snowblower. You need live PTO for that. I use a back blade, and move a lot of snow. I live in Rochester NY, and we get a lot of snow. With chains she works great with a backblade. >>>and occassionally helping my neighbor hay his fields. Pulling wagons or a PTO ror graound driven rake is fine, but bailing without live PTO is a challange. Since bailing usually requires enough concentration, it's a lesson in frustration without live PTO. I know a few guys who do it, but it's a challenge, and they have bigger tractors, and it's on flat ground. Good Luck, I hop this helps. Steve
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Adding an Hour Meter - by Steven Gussey. This article tells how I added an electric hour meter to my 1942 Farmall H after rebuilding it. I wanted to keep an accurate maintenance schedule for my rebuilt engine and the implements I use with my tractor, but the H was never available with a tach
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|