Posted by Kansas Cockshutt on January 15, 2009 at 07:34:06 from (12.5.176.70):
So, the wife is not happy with the tv situation. We used to get "analog" via small rabbit ears mounted on the tv inside the house and everything was fine, then the signal began to suffer as all the conversions and digital "tests" were run. We bought some digital converters, and hooked them to rabbit ears, and now we only get a nice picture half the time. Other half is nothing. At least with the old way you might get a fuzzy picture but it was still there.
I told her I would put up an outside antenna. Whoops! So guys, what do I need to do. I have read on here that I need RG-8 cable. Is there an optimal height to antenna ratio? I live on flat, flat ground. I have read I need an amplifier and a rotor for the antenna. How far can the cable run be with the amplifier? Do they make a "bi-directional" antenna that does not require the rotor? The concern with the rotor is winds regularly top 50 mph and I am afraid the little units I have seen won"t live long in the gentle Kansas breezes. And finally, who is the reputable dealer in this stuff, or are you stuck with chinese made questionable quality? Thanks in advance!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let�s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
