Posted by Heath from FTW Texas on June 11, 2008 at 17:17:51 from (68.93.110.224):
I recently purchased a 9N and it needed new front tires. So when the old tires were removed,(no suprise), the rims were so rusty I couldn't use the tubeless tires WITHOUT tubes because they wouldn't hold air. They were so bad that when I went to use the tractor the next day one tire was flat because the rusty rim had ripped the tube! I have been searching for replacement wheels but I can't find any listed anywhere of the same size. They are 6.00x16, 5 lug with a 9.75 pilot hole. I can find 4.00x19's with 9.75 pilot holes all day but not the ones I need!! Can anybody point me in the right dirrection? I've checked Wegners and other tractor parts stores on line and can not find a thing. All of the 6.00x16 wheels I find are 6 lug with the 4.?? pilot hole. Thanks in advance!!!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
