Posted by Leroy on June 11, 2008 at 19:30:08 from (209.143.52.200):
In Reply to: Front wheels posted by Heath from FTW Texas on June 11, 2008 at 17:17:51:
If you have good 16" tires it will be cheaper to get salvage yard 8N 16" wheels and the matching hubs and for most purposes the 16" are better handling tires. And the old Ford car wheels do not fit your hubs. I have the factory replacement wheels (same as what you have) on a 44 2N that Dad put on as soon as they became avaible and a 41 9N that when I bought it a few year ago had the 19" tires and after a couple of years I took some old Ford Car hubs and wheels I had here and changed everything over to the 16". There is about a quarter inch difference in the tractor wheels and the car wheels in the bolt pattern. And the hubs with the built in brake drums will not clear the spindals, I used hubs that had seperate brake drums.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
