4020 24 volt conversion

Posted by Beartrack on July 12, 2007 at 08:58:44 from (216.63.90.60):

Need Help!!!!!
Did a 24 volt to 12 volt conversion, starter and alternator, and now the fuel gauge dont work. Changed dash unit from a pos. ground to neg. ground, all that did was changed the pointer from pegged at full to pegged at empty. Tried a new gauge, same result. Done a bench test on gauge. Connected pos. on gauge to pos. on battery and neg. to neg. Using a test light as a resisted ground on sender terminal of gauge, got no result. Found that by powering test light from bat. Pos. and connecting to Sender terminal, the gauge would respond to that input. What next???? Thanks

Replies:

• Re: 4020 24 volt conversion Bob 11:34:47 07/12/07 (0)
• Re: 4020 24 volt conversion Shep Va 10:30:07 07/12/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]