Re: AC Industrial tractor identification

Posted by Dave Anderson on April 30, 2007 at 18:39:54 from (151.196.11.228):

In Reply to: Re: AC Industrial tractor identification posted by Dave Anderson on April 29, 2007 at 19:29:04:

One other thing. D-10 is a 1 row tractor. D12 is a 2 row tractor. That is the only difference. I40 is based on the D-10/12 series I and II tractor. I400 is based on the D-10/12 Series III tractor. (it is more modern than the I40, and rarer) The reason I don't differentiate between D-10/12 is because the only different part is the rear axle width, and the axle spacers. Sometimes the wide or narrow spacer was used on the industrial tractors, depending on the specs.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]