Re: Crimping used hydraulic hose

Posted by RodInNS on April 14, 2007 at 14:42:03 from (142.177.106.148):

In Reply to: Crimping used hydraulic hose posted by David M on April 14, 2007 at 08:13:13:

Yes, losing an end is a stated reason as to why a shop won't put another end on a hose. I've had them warn me about it, and then do it anyway. Most will because if they don't, somebody else will. However, I've gotten to the point where I don't bother most times anyhow. If a hose breaks in one place, unless it was cut or something, I don't bother fixing it. The connectors to fix an old hose are often as much money, if not more money than simply replacing the hose. If it blew once already, it's going to do it again soon.... so I just change the hose and be done of it.

Rod

Replies:

• Re: Crimping used hydraulic hose Jon Hagen 17:57:41 04/14/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]