4020 gauges

Posted by Chuck H. WI. on April 01, 2007 at 21:50:31 from (69.179.14.162):

I just replaced the fuel gauge on my 1965 4020. Still won"t work, when I turn the key on it bottoms out at empty. I have 12 volt at the neg., not much, about 5 volts out to the sending unit. I pulled the sending unit out and moving that around, made no difference.Grounded the new gauge as directions said.Also replaced the warning light on the dash for the generator, now it stays on constantly. I checked voltage coming out of the generator, it"s 12 volts at both poles. I assume this makes up the 24 volt system. Any suggestions, batteries don"t seem to be draining. Thanks for any help on either problem. Should of left alone. Chuck

Replies:

• Re: 4020 gauges Howard H. 09:33:23 04/02/07 (1)
  • Re: 4020 gauges Chuck H. WI 20:54:16 04/02/07 (0)
• Re: 4020 gauges Bob 23:33:56 04/01/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]