Re: old corn grinder

Posted by Mark on November 18, 2006 at 12:00:56 from (172.151.252.144):

In Reply to: Re: old corn grinder posted by Charlie M on November 18, 2006 at 10:46:09:

You fellers are always great to answer my humble questions. Thanks very much. Now, to just find a grinder! I have plans on running it with my Super A. I had my eyes on an old PTO driven sheller but it was just too far away from eastern KY. My JD 1B sheller has been converted to electric and it does fine for what it is.....sure would be nice to shovel it in instead of one at a time. If you never seen a hand cranked sheller driven by a 1.5 HP motor..it's a hoot! I installed a 16" compressor pulley and a 1.25" motor pulley...the motor is 3450 rpm. A 1725 rpm motor would have been ideal...but you use what you have:). As it is, it throws the cobs about 10 feet.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]