|
Tractor Talk Discussion Board |
Hindustan Tractor ??
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Gene Davis (GA) on October 26, 2006 at 20:57:12 from (70.41.83.26):
Friend called me last night and asked if I could help him with the clutch on a tractor he bought a while back. Went to work on it and here is what he has. A huge ugly thing that looks vaguely like about a 3000 Ford and is painted blue and grey like the Ford were. This is a 4 cylinder engine with a decompression lever to let the starter and a single 12 volt battery turn it. Yhe engine has an exposed shaft coming out of the left back side of the front gear cover extending back by the block that drives an injection pump that looks somewhat like an old Caterpiller pump; that has a coupling between the shaft and pump.It has a parking brake lever like they used on large trucks in the 30's and 40's. The kind you squeeze the 2 piece handle and it moves the lock pawl away from a ratchet plate. It is a weird looking thing seems to be patterened along the lines of 1959 ag technology. The info plate on the left fender says; Hindustan Tractor made in India Model 61 G H,P,61 date of mfg 1994. Did not have camera to take a photo of this beast. He knows almost nothing about tractors, but was needing some loader work done and an unscrupelous car dealer unloaded it on him, and now won't even return his phone calls about it. Any body know anything about this monster? He needs a book at least on how to operate it and where to get some parts and service info.. Did a google search on it and found nothing about it. Thanks for reading this and any info would be appreciated. Gene Davis
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
