Re: jubilee

Posted by john in la on August 31, 2006 at 06:04:51 from (68.222.52.44):

In Reply to: Re: jubilee posted by Dp4kkds on August 31, 2006 at 05:01:06:

I have a 5 speed trans so I can only tell you what the manual says about the 4 speed.

Remove the 9 bolts on the cover and lift the cover off.
NOTE!!!!! there is a shift rail spring and detent ball that the cover holds down. Watch for these and remove.
Back off the pivot bolt and align the shift plate finger into the shifter rails.
Make sure the gasket is still good on the piviot bolt and install bolt.
Replace the spring and detent ball on top of case.
Install gasket and top with the gear shift lever positioned into the gear shift plates.

Replies:

• Re: jubilee dp4kids 07:51:14 08/31/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]