Removal of Iron pipe from cast iron manifold

Posted by Irv Plitzuweit on June 28, 2006 at 12:48:19 from (205.188.117.14):

Will be attempting to screw out 1 3/4 inch iron pipe from cast iron manifold on Continental 6 cylinder flat head engine. It has been soaking several days with "Kroil" on threads. My question is how do I heat with acetylene torch? Do I just heat the pipe? try turing it out while hot? pour cold water on pipe while hot? heat both pipe and manifold. I don't want to crack manifold, so need some advice. THANKS

Replies:

• Re: Removal of Iron pipe from cast iron manifold Randy as in Randy-IA 18:28:02 06/28/06 (0)
• Re: Removal of Iron pipe from cast iron manifold old 13:04:16 06/28/06 (0)
• Re: Removal of Iron pipe from cast iron manifold doogdoog 12:59:41 06/28/06 (0)
• Re: Removal of Iron pipe from cast iron manifold RustyFarmall 12:57:33 06/28/06 (0)
• Re: Removal of Iron pipe from cast iron manifold Vern-MI 12:55:11 06/28/06 (1)
  • Re: Removal of Iron pipe from cast iron manifold Irv Plitzuweit 07:09:12 07/01/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]