Re: Removal of Iron pipe from cast iron manifold

Posted by Randy as in Randy-IA on June 28, 2006 at 18:28:02 from (207.177.83.242):

In Reply to: Removal of Iron pipe from cast iron manifold posted by Irv Plitzuweit on June 28, 2006 at 12:48:19:

I just did that a few weeks ago on my M manifold . Try tightening it first with a big pipe wrench . If it moves at all stop and start to back it out some and rock it in and out till it's free . If you are lucky it'll move this way , mine didn't . The pipe crushed so I ended up doing it the way Old just described and it worked good only I used a punch . Take your time . I used my 16oz hammer and only put as much behind it as needed to bend the iron . Just keep bending one side in and it'll come free . Good luck ...Randy

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]