|
Tractor Talk Discussion Board |
A response to How stupid they are (long post)
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by old fashioned farmer on April 18, 2006 at 09:22:36 from (70.106.180.229):
Howdy, After reading this post and the responses with it I just had to say a few words. I have worked in the parts department here at the local CaseIH dealer for a little over 10 months now. When I started out there were a few instructional things from the other two parts guys but the general consensus was that you'll have to catch on to most of the stuff as you go and that is pretty much true. In our case we have three parts guys and that's it so there is no room for an apprenticeship deal where a guy gets to work in a less "up front" type of position until he gets things straight. Add to that the fact that these computer systems are so screwed up sometimes that even when you know better, your parts lookup says otherwise. Well, let me ask you this. If that happens and the puter is all you have then what do you do? In my case I get the phone and start bending the ear of my case rep. Now, in the case of these newbie parts guys they may not think of that. Their main priority at that point is to get the overly angry customer that is yelling at them away from the counter. So that is why they don't go much further. I heard one person mention the "stupid customer" syndrome that I see an awful lot but no one went in too much on that. I've had a few people actually get mad at me when they come in and say I need such and such part for a massey ferguson tractor or a case disk, etc. They have no idea what model they have, have no part with them; just a picture in their mind. My first thought is to tell them to come back when they grow a brain but I don't. Instead I spend a good deal of time trying to read their mind and figure out what they are needing. I do all that, go out of my way to help them and then they still get mad at me for either not having the part in stock, taking so long to get it, or for getting the wrong part when I had to guess in the first place. That makes this job a little less than satisfying at times.
Then I have the people who will come in with a parts book, point to a part, tell me to order it, and then get mad when the part's wrong because they pointed to the wrong part.
Then there is the fact that our store carries some 42 different lines of parts and equipment. It is not too easy to know everything about every model within those 42 lines.
Needless to say I could go on and on about this stuff. When a customer comes in he needs a single part for his one piece of equipment. He has probably had this piece of equipment for several years and has seen inside it umpteen number of times. He has probably handled that particular part a dozen or so times as well. He knows his machine. He then goes into the parts store with this mindset and expects the guys at the counter to automatically be in his shoes. I'm sorry but that just isn't going to happen and doesn't. You may have something that even a seasoned parts guy has never even touched in his life. I spent my young life growing up on Deere tractors and now work for CaseIH so it's been a growing experience even though I have worked around that stuff a lot. So please, if you are going to one of these places bring your patience along with you, help the kid out if he doesn't understand. Don't treat this kid like he's stupid. Chances are he's already been treated that way at least half a dozen times already that day. All you do is make him feel belittled which only fosters two things: an "I don't care attitude" or a desire to quit and do a job where he's treated like a human being and not a punching bag. It doesn't lead this kid to want to do better and learn because no matter what he tries to learn, the next customer just brings in an oddball part that he hasn't seen. So the cycle goes on. I get tired of being treated like I'm stupid. I graduated from college with a b.s. in meteorology but took this low paying job because I love farming, wanted to preserve my grandparents farm, and wanted to take care of my folks. I get treated like I'm stupid by friends and family as it is and don't need impatient and unconcerned customers giving me crap just because of some stupid part. I apologize if I've set any fires with this post but this routine just gets old after a while. We're here to serve you and go out of our way a lot of times when we don't have to and we still get this. God bless. --old fashioned farmer
Replies:
Home
| Forums
Today's Featured Article -
The Day Mom Drove the 8N - by Brian Browning. My Dad was wanting to put in a garden but couldn't operate the 8N and handle the old horse drawn plow he had found and rigged up to use with the tractor. Well, he decided to go get Mom out of the house and have her drive the tractor while he walked behind the plow. You got to understand that while my Mom is a hard worker who will always help whenever she can... she had never operated farm machinery before that day. Dad got her out there, explained how the clutch was the same as in our o
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
