Re: Ampli Torc info please

Posted by cdmn on November 25, 2005 at 20:36:25 from (66.228.228.163):

In Reply to: Ampli Torc info please posted by John No Mi on November 25, 2005 at 16:47:28:

I've had an MM Jetstar3 with amplitork for 18 years. It's always slipped in low range, so I only use the high range. Serves well enough. There is a sprag clutch that needs to be replaced but figure a budget cost of about $2000. Maybe more since I checked. The sprags keep the tractor from rolling back in forward gear with the clutch down which is very handy, for starting on hills, but I'm pretty cautious about trusting it completely. However, if I want to shift to neutral or reverse, I have to let it move forward a bit to take the pressure off so I can shift the gear. Otherwise, pulling back the A/T lever will also release the pressure.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]