Re: Wisconsin V4

Posted by Larry806 on September 29, 2005 at 19:26:06 from (67.76.156.136):

In Reply to: Wisconsin V4 posted by J Kelnhofer on September 29, 2005 at 19:00:38:

I had a wisc that acted the same way. I put 2 sets of points & cond in it & I replaced the coil. Every time it would die it didn't have spark. If I used the points file just a little it would run a while again. A old friend that ran a shop over 50 years came down & brought NOS points & cond , same thing. We couldn't think of anything else to do so we gave up. A couple days later he called & said put that back in the shop. We took the plate out of the dist. that the points & cond fasten to, sanded the edges and the dist where it fits in. When we put it back together it never quit again. It was loosing ground for the points

Follow Ups:

• Re: Wisconsin V4 2x4 01:07:46 09/30/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]