Re: My Own Worst Enemy

Posted by Don-Wi on July 10, 2005 at 21:06:55 from (64.12.117.7):

In Reply to: My Own Worst Enemy posted by Allan in NE on July 10, 2005 at 04:46:45:

I'm more worried about that sprocket that's on the other side. Looks like the chain is worn out and stretched. At the very least, replace the chain if you havn't already, that'll delay the inevitable of replacing the sprocket. If it's a steel sprocket, that isn't too big of a deal, atleast not for me. I work at a machine shop that makes new sprockets for AGCO(Massey,Heston, NI,etc. etc.), Meyer's, Gruett's, Miller(Badger), and also gears for Articat. I replace sprockets for farmer's all the time, if it's a special hub we cut the sprocket off and weld on a new one. Could also be done to a cast sprocket, just use a NiCad rod to weld it on....
Donovan from Wisconsin

Follow Ups:

• Re: My Own Worst Enemy Allan in NE 03:33:02 07/11/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]