Tractor Talk Discussion Board |
Re: JD 1020 - Hydraulic Noise
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by jdemaris on March 22, 2005 at 20:08:50 from (209.23.29.131):
In Reply to: JD 1020 - Hydraulic Noise posted by fordlor on March 22, 2005 at 19:07:22:
When the closed-center pump make noise except when a hydraulic function is being used, the stroke-control valve is probably making the noise if it's internal, or the pump drive if it's external. The stroke control valve is a commom wear item. Your tractor probably has the little German 8 piston pump (13 GPM), not the bigger pump style like most of the other closed-center Deeres use. I mention that because the parts are completly different for the two little German pumps most 1020s use. They both look the same and are the same physical size, but one has 4 pistons and pumps 6.5 GPM, while the other has 8 pistons and pumps 13 GPM. The industrial version of the 1020 (the 300) uses the big style pump, and I've seen a few 1020s with that setup that were converted for loader use.
Follow Ups:
Home
| Forums
Today's Featured Article -
Product Review: JB Weld - by Staff. JB Weld is basically an epoxy glue that does an exceptionally good job of bonding to cast iron and steel along with several other materials. As I mentioned, it is so common that I have yet to buy a tractor that did not have JB Weld used somewhere. It is sometimes used so well you can't tell its there and other times used as a sloppy quick fix. Finding where and how it can be used correctly is key to whether you are using it as an "inelegant hack" or an integral solution to difficult and expens
... [Read Article]
Latest Ad:
1945 Farmall wide body gas with pto and front plow. Runs good but needs new points.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|