Re: 9N PTO Drive

Posted by Pitch on February 14, 2005 at 07:13:45 from (66.218.22.198):

In Reply to: 9N PTO Drive posted by Joe in VA on February 14, 2005 at 06:58:41:

You have to cut the shaft. That will be hard going but no other way. Measure it so it does'nt bind when fully elevated and then lower it and make sure it doesn't seperate when extended. Take half off of each section. file the burrs off and chamfer each end slightly grease it up and your ready to go.

Follow Ups:

• Re: 9N PTO Drive Joe in VA 07:34:08 02/14/05 (1)
  • Re: 9N PTO Drive paul 10:39:20 02/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]