Re: Adjusting a JD 4B plow

Posted by bubba on October 03, 2004 at 13:47:25 from (12.203.216.208):

In Reply to: Adjusting a JD 4B plow posted by Laurence on October 03, 2004 at 05:17:24:

Set the land wheel on a block the same height as what you want to plow.Then set the right or furrow wheel where the plow is level.This should be very close to where the plow will do a reasonably good level job.Do this on a level concrete slab.If you can't set it this way, this should tell you where the wheel sizes need to be changed.Then set the tail wheel where the back is the same plowing depth as the front bottom.You will most likely have to make the final tail wheel adjustment in the field.

Follow Ups:

• Re: Adjusting a JD 4B plow Laurence 09:21:03 10/04/04 (0)
• Re: Adjusting a JD 4B plow Leroy 18:28:33 10/03/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]