Re: Ford 5610 A/C problems

Posted by Bob on May 02, 2004 at 08:11:38 from (66.163.134.177):

In Reply to: Ford 5610 A/C problems posted by George on May 02, 2004 at 07:09:34:

You need to get a set of gauges on it and get some pressure readings.

If there is still an adequate amount of R-134 in it, the most likely culprit is a clogged expansion valve, probably with debris from a failed dryer.

Of course, compressor failure is possibility, too.

What thermostat do you think needs to be bypassed? Is it the operating thermostat with the capillary tube stuck in the evaporator, or do you have a high-temp cutout thermostat near the condensor? In either case, I'm not understanding why you'd want to bypass it.

Follow Ups:

• Re: Re: Ford 5610 A/C problems George 17:31:41 05/02/04 (0)
• Re: Re: Ford 5610 A/C problems Jon H 08:46:28 05/02/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: Ford 5610 A/C problems Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]