|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Balancing Tires With Golf Balls
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by sorry but we can disagree on November 29, 2003 at 06:54:45 from (66.157.66.94):
In Reply to: Re: Re: Re: Balancing Tires With Golf Balls posted by MarkB on November 28, 2003 at 19:47:04:
Sorry but you have a couple of things you are missing here. When a washing machine gets out of balance it has no water in it. The wet cloths are stuck to the side of the machine. A barrel rolling down a hill is not turning fast enough. If you spin it fast enough the water will go to the perimeter of the barrel. Tire dealers buy spin balancers to balance car tires. The average Joe that drives in town does not get up enough speed for a long enough time for this to work. He would be complaining about vibration at low speeds. So they balance the tires. Spin balancers are now available for large tires but are seldom used. Checking this on a spin balancer would not work. It does not spin fast enough. Remember we are talking about 24.5" tires that weigh several hundred pounds each with rim not some 15" SUV tire. Large trucks run down the road at 60 to 70 mph for hundreds of miles at a time. Not stop and go. Enough damping to noticeably reduce vibration is about all you can expect out of large truck tires. Me and hundreds of others wish they rode like a SUV but they do not. Large trucks are always wearing flat spots in tires from braking for SUV's and a automatic balancer adjust for this. In fact with 1,500,000 miles I have never had a large truck tire balanced. We use the ring or most times nothing at all. Just mount the tire and go. My kidneys at least like the balance ring. I would strongly recommend that no one tries to use this method in their personal vehicles. You will not be happy. Have a great day!!!
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Show Coverage: The Old Gold National Antique Tractor Show - by Cindy Ladage. Over the fourth of July weekend, the Illinois State Fairgrounds in Springfield, Illinois, was the site of the Old Gold National Antique Tractor Show. Tractors of all makes and models were displayed and separted into categories by their age. Deere, Oliver and even a Wards and Keck Gonerman were part of the crowd. A sea of red International Harvester's seemed to be the the model with the biggest showing. The crowd was decent for the scorching July heat. The opening day started o
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|