|
Tractor Talk Discussion Board |
Re: Planing a workshop with living quarters- need
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John Fugit on July 13, 2003 at 09:26:43 from (66.83.236.250):
In Reply to: Planing a workshop with living quarters- need inpu posted by JRC Farms on July 12, 2003 at 05:39:12:
I've seen some of your custom toys. No wonder they won't let you leave. You all do a fantastic job! I want one of your 8650 Deere's, bad. I have a "shop/apartment" like you're talking about. My wife and I lived in it for a year and a half, while we tore down the old house, and built a new one. I had zoning approval. It's on ag land, and I submitted the plans as an in-shop office, with restroom, showers, and offices. They don't have to know everything you're doing. I have a separate address, and mail box. We set up two bedrooms, a "family room" and a kitchen. (Offices need kitchens too). What I did to isolate the living quarters from the shop was to build a concrete block "firewall" between them. Both parts have separate heating and cooling capabilities. That prevents the shop smell from entering the "house". I agree with the idea of the living quarters being upstairs. I have a storage area under the living quarters. that makes for easier plumbing, and running the ductwork. It also affords a little privacy, when my employee's would be in the shop. Hope this helps. (If it does, I'll take any of your John Deere customs as thanks!) John Fugit
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that�s wha
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|