Re: Off-the-wall question

Posted by Gary-Miss on April 14, 2003 at 19:09:12 from (152.163.188.71):

In Reply to: Off-the-wall question posted by F14 on April 14, 2003 at 17:05:17:

You will notive that's FPM (Feet per minute) not RPM (Revolutions) That's the reason you see the old G John Deere with a HUGE belt pulley and theB with a tiny one. Both of them are direct crankshaft drive . The G is slow and the B is fast. Theeend result on a hammer mill is that both of them turn the mill at the same speed. in feet per minute.

Follow Ups:

• Re: Re: Off-the-wall question F14 - Yep 03:44:32 04/15/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Off-the-wall question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]