Re: How hard is it to cut

Posted by DeltaRed on March 29, 2021 at 21:54:20 from (174.198.135.142):

In Reply to: How hard is it to cut posted by SVcummins on March 29, 2021 at 21:07:41:

You can't cut cast iron with a torch. So you are going to have to use a Sawzall with a metal cutting blade at a slow or speed. Or a cut off wheel on your side wheel grinder would probably work. A water jet cutter would probably be the best if you have a place close to you that does that kind of work . What kind of weight are you putting on which tractor? Any pictures?

Replies:

• Re: How hard is it to cut Naylorbros 14:20:04 03/31/21 (0)
• Re: How hard is it to cut SVcummins 06:58:39 03/30/21 (0)

Add a Reply! You must be Logged In to Post Name: E-Mail: Subject: (avoid special characters) Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video Embed: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks. No political comments, hate speech or bigotry of any kind will be tolerated. Violations will be removed and posting privileges may be permanently revoked without notice.   Advanced Posting Tools   Select Gallery Photo  Attach Serial No List  Return to Post  Upload Photos/Videos Choose Files from your local computer Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]