Re: Loader removal

Posted by Jordan(OH) on September 01, 2001 at 04:27:05 from (63.10.216.31):

In Reply to: Loader removal posted by Bill on August 30, 2001 at 21:55:01:

I don't know how simimlar they are but we
have a MF 265 with MF 236 loader. To
disconnect, we simply flip up one lever on
each side of the bracket under the tractor.
Then tip loader frame forward(same as you
would normally lift it up but it will tip forward
with rear mounts unlocked). Once the rear
mounts are high enought to clear the front
mounts, the bar that goes around the front of
the tractor will support the loader with no
jacks, frames, props etc. needed. Then
disconnect the hydraulic lines and back up, all
takes less than a minute. E-mail if you have
more questions, Jordan(OH)

Follow Ups:

• Re: Re: Loader removal ted 23:07:34 09/03/01 (0)
• Re: Re: Loader removal Bill 05:00:33 09/01/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Loader removal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]