Posted by oifmedic on June 13, 2018 at 06:51:31 from (55.64.39.53):
Good morning, I have a 1959 801 Ford Powermaster that I inherited from my dad. I was having issues getting it cranked with the old carburetor (I thought) so I bought a brand new Zenith carburetor to replace the old one. I installed the new carburetor and still cannot get the tractor cranked. I replaced the points, spark plugs, and coil so it is getting fire but not gas. when I try to crank it, I pull the choke and fuel seems to be flowing and seems to be flooding because when I pull the hose that connects the carburetor to the air filter and gas flows out. still doesn't seem like gas is getting to the plugs because it doesn't even try to fire off. I have also cleaned the air filter and checked to oil level. Any insight on this issue would be greatly appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Black Tire Paint - by Staff. I have been fortunate in that two of my tractors have had rear tires that were in great shape when I bought the tractor. My model "H" even had the old style fronts with plenty of tread. My "L" fronts were mismatched Sears Guardsman snow tires, which I promptly tossed. Well, although these tires were in good shape as far as tread was concerned, they looked real sad. All were flat, but new tubes fixed that. In addition to years and years of scuffing and fading, they had paint splattered on
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
