Re: Starting issues

Posted by Royse on December 20, 2017 at 15:40:41 from (69.36.53.231):

In Reply to: Starting issues posted by Goat Boy on December 20, 2017 at 15:05:20:

"voltage from positive battery terminal to the starter cable u

get a reading of 12.48 volts. When I check the battery side

cable the starter switch it reads zero."

Without the the transmission mounted button pushed to engage

the starter switch under the battery box, this sounds like normal

operation to me. And it is a switch, not a relay or solenoid.

My guess, since you can jump the switch and it works, is that

your linkage is worn where it goes through the transmission.

That's a common problem. It just doesn't push far enough to

actually engage the switch/starter anymore.

It can be rigged by JB Welding a washer or a penny to the top

of the actual switch when you remove it with the two bolts under

the battery tray; or you can fix the linkage correctly.

Replies:

• Re: Starting issues Goat Boy 17:18:00 12/20/17 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]