Posted by abertarelli on May 13, 2017 at 21:09:50 from (24.8.142.32):
Well, I am now feeling very defeated with this machine. Any help would be awesome. I have owned this thing for 5 years and it paid for itself 10 times over. I am mechanically inclined, but have ventured into uncharted territories. I have never had that many issues with this machine but when it rains it pours. I have successfully pulled the clutches and rebuilt them. Then I spun a bearing two days later. I pulled the engine pulled it apart and did the big one. Sleeves, pistons, new rod and all engine bearings and seals. After minor troubleshooting hit her to firs back up after I wrestled the engine back in. Patted myself on the back and put it to work. Pulled and dug 20 fence posts, and cleaned and treated my pasture. Machine runs like new and has 190 ish psi on the shuttle clutch pressure. I go out today and pull up an enormous stump, and awesome, it comes out in ten minutes. Everything feels amazing. After all the clutch problems and engine troubles, it's amazing it even runs well like this, I am happy. And then, just stops. I'm in first gear moving machine, shift to second, driving along and wan just stops abruptly. I was in the street moving to back of property and cars were starting to get pissy. I put it in neutral and used the hoe to push me to the side of the road. I now have no clue what to do. Machine runs fine, has proper clutch pressure but does not move. What I did:
1. Pulled clutch cover off and inspected clutches. I can see forward and reverse engage and disengage when I move shuttle lever. I also have proper clutch pressure.
2. Lifted myself off ground stuck it in forward and reverse no rotation while in gear.
3. Take it out of gear and can spin tires, but they spin in opposite directions.(diff)
3. Put it in gear and tried to push myself with bucket, I just drag both tires forward and reverse.
It seems like something is stuck in the tranny or diff. Everything I did to the machine works great. From tranny to the front everything has been gone through, cleaned and painted. I never have taken apart the tranny/diff just changed fluid. The fluid is new and correct on dipstick.
I know someone out here can point me in the right direction. Please advise. I will be eternally grateful.
Specs to help out
580ck
Shuttle shift
Why everything works except movement sounds like a broken planetary gear or pinion gear of some sort. It looks fairly accessible from the top side. I'm going to pull seat and top cover and look in there, what should I see?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.