Posted by FWB in SK on October 25, 2015 at 14:02:59 from (100.43.110.103):
Noticed racoon tracks trying to get in my shop door. Set the live cage wire trap. Checked the trap and guess what. There is a skunk in the trap. How do you get rid of the skunk without being sprayed. Could shoot it. But I am sure it will let loose. Trap is big enough that it can lift it's tail. What NOW.
I Got a long pole with a hook, dragged it away from the shop, no problem. Got a tarp slowly covered trap and lifted it on tailgate of truck. Still OK Drove out to a bush about a mile from yard.Wind had blown tarp off. Now what to do. Got a long stick from bush hooked it in trap pulled it off tailgate. Still no smell. So decided to shoot while skunk was in trap. Wrong idea Shot it in the head . Did it ever let loose . Got out of there real fast. Will come back and try to retrieve trap another day. Should of taken advice to shoot it in backbone , but received that advice to late. Know what to do next time. Thanks for all the advice.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
