Posted by Raner on September 04, 2013 at 12:25:47 from (64.219.31.244):
Hey All... I just bought a 1449 Farmall-H according to the vin... It's runs fine well need to work on the carb... Looks like it's got a heavy float or a bad needle or seat...Back to the Megneto somebody along the line had a problem with the megneto and installed a coil and ran a wire from the points to the negative side of the coil and positive wire to the positive side of the coil and made it work...I have not even got it home yet just did a field inspection... I am going to mark the megneto and the rotor were is seats right now and jurk it off to look inside see what is going on...I'm sure it is a bad connection or a grounded wire that is causing the problem... Has anyone here ever had a uncommon problem with a megneto that I should know about...or can give some tips what to look for...(Megneto number H41233255) Oh almost forgot...I have a Farmall-B. I had pulled the megnito from it a long time ago can't even remember what for. I was talking to my brother and had the megneto in my hand without the coil cover on it, I was holding it from the top I spun the megneto drive gear with my other hand and it knocked the crap out off me when it fired...I'm going to do the same thing with this one when it knocks the crap out of me I'll know it's working fine...LOL...Thanks Raner...
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Women and Tractors - by Teri Burkholder. The View from the Garage - Never a doubt, everything on our farm is a learning experience. I've been working very hard to get our two rundown Farmall A's sanded, primed , bondo�d, fiberglassed and painted before our big local tractor show called the Tulip Festival. My husband Ben came in the garage one rainy day to see if he could "help". Well if you knew Ben you wouldn't want him anywhere near your spray gun, fiberglass or bondo! So I pulled out the 2 old yucky looking magne
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
