Welcome! Please use the navigational links to explore our website.
| Subject | Posted By | Year |
|---|
| Pull disc no name but has DH on the parts | David1 | 2013 |
| Pull type combine | David1 | 2011 |
| Pulling the Knotter shaft out of a JD 14T Baler | David1 | 2013 |
| Putting a snow plow on the front of a tractor | David1 | 2013 |
| Putting grease fittings on a NH rake | David1 | 2010 |
| Putting new wood in a #18 NI spreader | David1 | 2014 |
| Question about a NH 450 Sickel mower | David1 | 2012 |
| Remote control to steer the tractor. | David1 | 2010 |
| Removing a tight baler plunger. | David1 | 2013 |
| Removing a dunham-Lehr 22 loader | David1 | 2011 |
| Repairing a jack on a New Holland Jack | David1 | 2011 |
| Replacements for tractor seats anybody have a place | David1 | 2011 |
| Rhino Batwing mower | David1 | 2014 |
| Rolling hay in the winter | David1 | 2010 |
| Round baler bearing repacement tips Vermeer 504 G | David1 | 2010 |
| Rowse 9 ft sickle mower | David1 | 2011 |
| Rubber mounted tedder teeth | David1 | 2012 |
| Rust through in a NH bale chamber | David1 | 2010 |
| Sealing up a NH 55 gearbox | David1 | 2013 |
| Serial numbers on the 14 T | David1 | 2012 |
| Sickel bar sharpening machine | David1 | 2013 |
| Slow hydraulics on a Ford 6610 | David1 | 2010 |
| Source for trailer, springs, shackels axels | David1 | 2011 |
| Spray can painting a baler | David1 | 2013 |
| Springs for a Vermeer 504 G baler | David1 | 2010 |
| Stopping rust on a haybine pan. POR 15?? | David1 | 2012 |
| Straightening a pipe tine bar from a tedder | David1 | 2013 |
| Superior gear box for a vermeer baler- wanted | David1 | 2011 |
| Taking apart the Knotters on a JD 14 T baler | David1 | 2013 |
| Taking apart the little gearbox on the 3 pt lift | David1 | 2012 |
| Teeth for a Grimm Flipper type tedder | David1 | 2012 |
| Telescoping PTO shaft , where to order it? | David1 | 2014 |
| Tines for a Pequea hay tedder | David1 | 2013 |
| Tongue off of NH 273 , fit a 311 NH baler | David1 | 2011 |
| Tractor battery best brands | David1 | 2014 |
| Tractor running with the PTO off , any chance of implement | David1 | 2011 |
| Tractot battery gone bad | David1 | 2010 |
| Treatment for dry rubber on haybine rollers | David1 | 2011 |
| Tried to trade in my 488 haybine, key word tried. | David1 | 2012 |
| Trying to get the knotters on a 24 T to cycle | David1 | 2013 |
| Twisting PTO Shaft on 5 ft bush Hog | David1 | 2013 |
| Vermeer 504 G Belts cutting into guides | David1 | 2012 |
| Vermeer 504 G , keeps throwing chain | David1 | 2014 |
| Vermeer 504 G baler, a slow baler? | David1 | 2012 |
| Vermeer 504 G baler, looking for someone parting one out | David1 | 2011 |
| Vermeer 504 G differences from a plain 504 | David1 | 2011 |
| Vermeer 504 G electric twine tie question | David1 | 2010 |
| Vermeer 504 Super G baler in the junkyard @ .25 per lb | David1 | 2012 |
| Vermeer 504G Bearing on the triple sprocket | David1 | 2011 |
| Vermeer 605 Super G Horse Power Required | David1 | 2014 |
| Vermeer Baler Gearboxes 504 G etc | David1 | 2011 |
| Wanted horse drawn hay tedder | David1 | 2011 |
| Weed Wiper implements | David1 | 2012 |
| Welding a broken rake tine bar. | David1 | 2014 |
| Welding and turning a damaged shaft | David1 | 2012 |
| What is the difference in a 24T from a14T JD Baler | David1 | 2012 |
| What kind of a Hay year are you having? | David1 | 2014 |
| What number JD loader for a JD 2940 | David1 | 2012 |
| Wheel bearing number for a JD 24 T | David1 | 2013 |
| When to change a Ford 4610 air filter | David1 | 2011 |
| Where can you find tractors with blown motors? | David1 | 2011 |
| Where to get the replacement rubber haysaver wheels | David1 | 2012 |
| Wire tie compared to twine | David1 | 2010 |
| Wisconsin baler engine , stuck valves | David1 | 2013 |
| Zero turn mower , Ferris or other brand | David1 | 2013 |
| advice on making hay this time of the year | David1 | 2010 |
| after market bearings for NH rake | David1 | 2011 |
| after market vermeer 504 G teeth from Tractor supply | David1 | 2010 |
| bent 14t needle in the wood stove | David1 | 2013 |
| carbon soil treatment | David1 | 2013 |
| ear corn vs shelled corn | David1 | 2013 |
| fair price for a 1/4 turn NH bale chute | David1 | 2012 |
| ford 4600 pto won't turn off | David1 | 2013 |
| ford 4610 piston question | David1 | 2012 |
| ford 530 sq baler | David1 | 2014 |
| freeing a stuck plunger in a 24 T baler | David1 | 2013 |
| gooseneck equip. trailers, what do you have | David1 | 2010 |
| log splitter 3 pt versus one that comes with its own motor | David1 | 2010 |
| looking for parts for a NH 55 rake | David1 | 2012 |
| need advice on adding 2 more remotes to Ford 4610 | David1 | 2010 |
| new holland 477 haybine, drive pulley springs pins | David1 | 2011 |
| nh 450 sickel bar worn, scalloped on the ground side. | David1 | 2012 |
| tight/stuck spindle on hay wagon | David1 | 2014 |
| trying to fix a broken tach cable on the 4610 ford | David1 | 2010 |
| vermeer 504 G Chain running hot | David1 | 2010 |
| vermeer 504 G problem | David1 | 2010 |
| whats it cost to get a tractor painted in your area? | David1 | 2010 |
| wood splitter with motor, what to buy. | David1 | 2013 |
| 14T baler PTO shields | David1 | 2012 |
| 18.4 X 26 tires. Any idea what they fit. | David1 | 2013 |
| 1996 NH488 just bought it. And its gearbox full of water | David1 | 2012 |
| 24T plunger pin | David1 | 2013 |
| 488 wobble box question | David1 | 2010 |
| 504 G baler bearing replacement | David1 | 2010 |
| Advice on buying a backhoe | David1 | 2013 |
| Allis chalmers 2 row corn planter | David1 | 2013 |
| Any companies still make moleboard plows? | David1 | 2014 |
| Any way to patch cracks in the rubber on a haybine? | David1 | 2012 |
| Anybody used that roundup ready alfalfa | David1 | 2012 |
| Bale baskets, take apart to move. | David1 | 2012 |
