Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Implement Alley Discussion Forum

Vermeer 504 G baler, looking for someone parting one out

Welcome Guest, Log in or Register
Author  [Modern View]

05-27-2011 06:31:06

Report to Moderator

Anybody have a contact on used parts for a 504 G baler. Mainly looking for a spare roller.

[Log in to Reply]   [No Email]

05-27-2011 18:05:47

Report to Moderator
 Re: Vermeer 504 G baler, looking for someone parting one... in reply to david1, 05-27-2011 06:31:06  
If nothing else works out, when mine broke the dealer suggested I go to a machine shop with the old parts and have one made, much cheaper than dealer part. Was a good suggesion....


[Log in to Reply]  [No Email]

05-27-2011 13:50:18

Report to Moderator
 Re: Vermeer 504 G baler, looking for someone parting one... in reply to david1, 05-27-2011 06:31:06  

I have a spare roller for inside the clamshell with new bearings I'll take $50 for but it will have to be picked up and I'm in SC. Had it fixed for a spare and sold the baler before I needed it.


[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy