Ford Tractors Discussion Board|
2000 3-cyl torque specs
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by John A (TX) on August 21, 2004 at 18:53:33 from (220.127.116.11):
Anyone have some 2000 specs they wouldn"t mind sharing?
A friend is rebuilding a 3-cyl 2000 and could use some info on torque specs and piston orientation (notch on pistons goes toward front or rear?)
Yep, I know (and HE knows) he needs a manual but, aside from that, if anyone would be kind enough to post torque info (head bolts, mains, etc.), it"d be appreciated. Specifically:
- Connecting rod nuts
- Head bolts
- Main bearing cap bolts
- Oil pump to block
.. Plus any others you wouldn"t mind sharing.
I checked the Vintage tractor resource and it looks like it"s pre 3-cyl. so no luck there.
I"ll apologize in advance for imposing on your time. He"s had time to get this kind of homework done while waiting on the dang parts, but .. he didn"t, and now needs a favor. Guess most of us drop the ball on being organized once in awhile so, to any who might be able to help, thanks in advance.
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
1486 international tractor. Good a/c. New led lights. Good ta. Weak power steering. Asking 10k obo
| Copyright © 1997-2023 Yesterday's Tractor Co.|
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy