Re: Seed Plate Drive Oil/Seal

Posted by SuperA-Tx on February 07, 2007 at 11:22:28 from (4.90.1.214):

In Reply to: Re: Seed Plate Drive Oil/Seal posted by Daniel H. on February 07, 2007 at 06:39:50:

Daniel,

I got it off and got the seal out, its a number 53599-D. Has a kind of concave outside.

I see three is a groove on that drive like you mentioned there might be. I took the center bolt out and thre isnt any O-ring, just a lock washer. Far as I can tell it wasnt leaking from there so I hope that will be OK when I get it back together. I might add some greese to it some way and maybe that will help seal it up.

Im taking the seal to bushing and seal place close to me to see what they can match this too. Maybe it will be a little differant where it wont ride in the groove. In fact if its like the other ones I can probly put two of the new cheep ones in place of this old one.

Replies:

• Re: Seed Plate Drive Oil/Seal Daniel H. 19:11:32 02/07/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]